[Type] 4POT Rear Caliper 83mm Pitch Race Only TZ Type [Color] Black [Mounting pitch] 83mm [Components] Dust seal [Quantity] Left / right set [Specification] Φ34 x 2 and Φ30 x 2, exclusive for racing [Weight] Weight including pad: 1.025Kg
*As to TZ250('88-'01), the brake hose and banjo bolt must be replaced or customized. *As to ABS vehicles, please consult a specialized dealer. *The caliper is an important safety part and needs to be done at a certified factory. *Images may contain other products. *There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Although I was dissatisfied with the heavy braking touch in the Normal caliper, I changed to this one and obtained the subtle touch which was in the operating range of Lever with NISSINRadialΦ19Type in conjunction with Brake master, and it became easy to do control. However, the grip seems to have become a little deep and I think it is even better when there is an extra finger's worth of room. There are no complaints about the braking ability.View Detail
It is the best match for Yamaha's 83mm Pitch vehicle. Because Brake Pads will be for TZ, STREET Although there are many things for Circuit than for the purpose, I want a vehicle that is not currently on sale so I want it Pad is not available right now.View Detail
[Refurbishment] Because Banjo bolt's Pitch is 1 mm, Bolt change is required for conversion from Tokico. Also, because Hose's outlet is close to Caliper installation, Banjo fitting If it is positive, it tends to interfere with Front fork. It is installed in my Motorcycle, ACPerformance line (Active) So, try 20 °, 45 ° Fitting, They interfere with each other and can not be installed. I thought about retrospect, but because it is an inefficient route, Change to Direct fitting. In case of changing from Tokico 6 pod, Direct fitting with screw Pitch 1 mm I recommend you to prepare.
All other things are completely Bolt On, Caliper installation Pitch and Caliper center are the same. If Hose is Direct, it will not be short, so it will not be a problem as it is. (The mounting condition is as shown in the picture)
【Brake performance】 Even if you change from 6 pod to 4 pod, there is nothing wrong with Brake performance. Four pods may feel as de Tune, but the control nature of the Tokico 6 pod Because I could not improve the point that was likely to be bad, I think the current car is back to the 4 pod. It is also Merit of 6 pods, braking force, resistance to fading, Pad and Fluid With performance evolution, sufficient performance can be obtained with 4 pods.
【Review】 Tokiko opponent 6 pod that passed age, Piston's movement got worse, it does not work, so we strongly hit Brake, Next time Kakkin symptoms that Brake hurts appear. If the initial symptoms are recovered by Caliper's gush release, Overhaul is necessary when it does not recover even if it leaks out. Used car with 6 pods or long time riding If there is a similar phenomenon in Motorcycle, you should consider Overhaul or Caliper exchange in doubt here. I encourage you to upgrade Caliper rather than keep using the obsolete Caliper. Because the parts of Impre are adopted as OEM, we get second hand goods, but after all, second-hand goods whose features are unknown I think that it is better to buy a new item if it is Rebuilt. Those who purchased a used car fitted with 6 pods, To those who continue to ride a love machine, it is a part of the recommendation. Conversely, when this Caliper became popular Motorcycle There are many good motorcycles, I want the parts to be updated and continue to ride.View Detail
Although I have not been impressed by this CaliperSingle Body, Radial master - Mesh hose - Rotor And this is a replacement impression with Set with Caliper,
I used about 10 years for replacement around 2006, but the price is reasonable, Replacement parts are also easy to obtain, Brake's Fee Ring is also very good, Air bleeding is also a good way to get through well, with no complaints Level, Piston's Sticking is also not my case, but occasionally I run a little passionily at the pass, I usually Because it is Touring, it may be,
Even when installing, there is no problem with accuracy, the center output is at most ShimQuantity : 1pc. With just enough to hold it, OK, Since I hit the disc as well as 1 mm inside of the outer perimeter, Limit feeling is very good, This has compatibility with Support though,
Regarding effectiveness, it works with OEM's Pushing! But it feels good, but, Explanation is difficult, I feel that the effect of Radial master is Large, Disc diameter also changed from OEM 300 Φ to 320 Φ Large, so compared to OEM braking force rather than saying, It is the impression that the fe Ring and the control feeling have improved very much,
Finally it is Design, but because the color is Black, OEM is very good, From the latter half of the 1990's? 6 Pod Caliper came out, SS at the time I also feel like it was also adopted, now (2016) 4 pod Radial Mount, At the time, the 6 Pod Caliper puts the outside of the disc in between, It was fashionable because it was effective, so I bought it, but now It may be out-of-date, but various systems are out I think that it is a good thing to trial and error,
There is no concern about brembo etc, it may be somewhat heavy, even if Piston sticks It is recommended for those who say it by myself!. View Detail
OEM's TOKIKOCasting 6 Piston Caliper (Commonly called Edamame) Maintenance frequently, or incorporating Aluminum Piston of GSX 1300 R HAYABUSA in OEM diversion Spec. After all, the original construction of TOKIKO was not good either, and I was disgusted by the deterioration of Caliper Body, so I tried to adopt it with the acquaintance's recommendation. Although Pad attached from the beginning is sweet in the early stomach, control nice after grasping is good, Piston does not easily drag, and as expected it is the name of the former caliper. Although Master cylinder is still NORMAL, there is no problem but I think that it is necessary to extend Brake hose by about 10 cm in most models attached TOKIKO 6.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!