Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Color] Black [Product Code] ・IH-220-S model: 339-3350-00 ・IH-220-M model: 339-3351-00 [Material] Resin, Aluminum [Weight] ・IH-220-S model: 145g ・IH-220-M model: 146g [Maximum holdable weight] Up to 300g [Mountable size (diameter)] ・IH-220-S model: 22.2 (typical bike handlebar size) to 28.6 ・IH-220-M model: From 28.6 to 35 (including handlebar size / 31.8 which is common in sports bikes) [Specification] ・Recommended design size: Smart Phone / Protective Case Width 55mm -85mm, Thickness 6mm -18mm ・One-touch clamp one year
[Cautions and Restrictions on Installation of Telephone Equipment] *There is no waterproof function to protect the phone from rain.Using the phone in the rain may cause the phone to get wet and break.Please take responsibility for waterproofing measures individually.It has been verified that the device can be operated even when it is placed in a sealable plastic bag such as a ziplock. *Designed with a locking mechanism that securely holds the phone and prevents it from being released accidentally, but it cannot withstand large impacts that may occur when the user forgets to set the lock, drives on rough roads, or goes over bumps in the road.Be very careful and always ride at a slow speed depending on the situation.We are not responsible for any compensation even if the mobile phone comes off the holder body and falls.The use of this product is at the user's own risk. *Not all phone functions can be used while on the holder because the position of the camera, speaker, and earphone jack are different among the models of each manufacturer. *The size of the phone will vary depending on the user, such as the phone alone or with a protective case.The side hooks at the tip of the wing can be changed and adjusted by the user. Please be sure to adjust the size of the wing to your own size before using it. *The clamp from the side of the phone is designed to exert considerable force, but because it is made of resin, it may break if it deteriorates over time due to ultraviolet rays or other factors.Keep an eye on your phone at all times.
[Cautions and restrictions regarding installation of the main unit] *For the quick clamp, first adjust the clamping force with the adjustment screw at the base of the clamp to obtain the appropriate clamping force, and then turn down the locking lever.The holder can be installed by tightening the screw after the lever is turned down, but the tightening torque is not sufficient and the holder may wobble during use. *Make sure that the adjustment bolt is fully retracted into the holder body when the lever is clamped.If the bolt is still floating, it is not clamped firmly. *To prevent scratches and to ensure sufficient clamping force, wrap the supplied transparent sheet around the handlebar and install it over the sheet. *When raising the lever, operate it with your finger, not with your fingernail only.The lever is closed with a strong force, which may injure your fingernail. *On drop bars for road use where the brake and shift wires are installed along the handlebar, the clamp may apply excessive force to the cable and crush the outer cable.It is recommended to install the unit as far away from the cables as possible. *This product cannot be installed on handlebars or seat posts with a non-circular cross-section. *We are not responsible for the theft of equipment while parked due to the ease of removal.When you park your bike, please remove it and take it with you. *Operating a mobile phone while driving is prohibited by law and is extremely dangerous.Staring at the screen for a long period of time can also lead to inattention to the road ahead, which can lead to accidents.Use and operation of cell phones must be done at your own risk and in compliance with local laws and regulations.
It is a holder that easily attaches a smartphone to the handlebars of a bicycle. The holder can be attached and detached with a one-touch clamp.
■Features ・The recommended design size is from 55mm to 85mm in width and from 6mm to 18mm in thickness for smartphones and protective cases. ・There are two sizes of side hooks at the end of the wing that open wide to the left and right, and they can be replaced or adjusted according to the thickness of the phone. ・Locking mechanism to prevent the wing from opening even when subjected to a strong impact.(*1) ・The phone is equipped with a stopper to prevent it from moving forward even when going downhill.(*2) ・A replacement lower extension arm is included to accommodate larger smartphones. ・The orientation of the phone can be set to any angle in 9 degree increments.(360 degree rotation) ・The offset setting slightly forward of the steering wheel improves visibility. ・By removing the horizontal mounting adapter and connecting the clamp directly to the angle adjustment plate, you can set the position directly above the stem (*3) or handlebar. ・There is a hook on the back side of the main body of the holder to attach a silicon band for fall prevention. ・The SM clamp model is easy to remove and install. *1: Depending on the degree and direction of the impact, it cannot be guaranteed. *2: Front and rear size adjustment is to be done by the user. *3: Mounting on handlebar stem (round cross section) is only available for iH-220-M model.
■Mounting/clamping The SM clamp is used in this product for easy mounting and dismounting. ・The iH-220-S model can be mounted from 22.2 (typical bicycle handlebar size) to 28.6 ・The iH-220-M model can be mounted from 28.6 to 35.(Including handlebar size/31.8, which is common in sports bikes) ・The SM clamp can be installed and removed by quick operation.(No tools required)
■About installing the iPhone 6/iPhone 6 Plus ・iPhone 6: It can be attached to this product. ・iPhone 6 Plus: The lower arm can be attached to the product by replacing the lower arm with an extension arm. *All arm replacements must be done at your own risk.
Recently viewed products
Ratings & reviews for this product or related products
Quantity:Pair (for Left and Right) In addition, it is stable and well supported at the top and bottom. I don't think it will ever come off and fall off. RecommendedView Detail
I installed it on my PCX160. I bought it because Navigation is a necessity for Touring etc. There were two types of nails to fit the size of the phone, but the size of the phone was too large to fit. I remove the upper nail and fix it in three places, and I fix the upper part with Silicon band of the fall prevention and use it, but so far It does not seem to fall while driving. The mounting part is Material:It's aluminum so it's durable and easy to use because you can attach and detach your phone with One-touch. If I had wanted to, I would have wanted Color variations.View Detail
Was the one you received as per Image? As per the Image, the impression is that it stops the phone more firmly than I expected.
How was your experience with it? As long as you keep out of the rain, you'll be fine.
[Points to note] Rubber comes to the screen, so it's a little obtrusive. I feel like I'm going to blow up if I try not to cover the screen, so it's best not to worry about it!
How did it compare to other products? I used a folder type before, but it was often difficult to see because sunlight was reflected.View Detail
With the purchase of a new mobile phone, this one was replaced as well. I use it on the Far Way P30pro, but it is ExactlySize with an extended arm. VerticalQuantity:2pc, Horizontal Quantity:Firmly pinned in with 2pc claws, so my phone has never flown off while driving, including the older products. It's cheap-looking plastic, but it's strong and won't fail. The whole MODEL must have been used for almost 8 years... Again, I expect it to last a long time.View Detail
We also supply Daytona with the MiKnowla Smartphone Holder on an OEM basis, but we dared to choose MiKnowla. It is sometimes cheaper to buy from the MiKnowla Brand in the first place.
For mounting on a Motorcycle, I prefer to use the reliable Gold genus. It is said that the smartphone Mount part is a highly durable resin. Indeed, there is no fading or deterioration of UV light even if you leave it on for about two years and operate it. Phones are expensive and you can't drop them. If you're going to buy one, it's best to buy Bestseller.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!