Low-down type: Approx. -30mm Front Data: Oil number #7.5 / Oil surface 140mm Spring Type: Constant rising rate (front and rear) Remarks: Oil 2L included [Set components] ・Front spring (Part number: 22093960) ・Rear spring (Part number: 22093961)
*If the bike is lowered by more than 30mm, a short side stand may be required depending on the condition of the bike.If your vehicle is equipped with a preload adjuster, adjust the lowering to a level where the side stand can be used. *When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock) *After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
* The image is only for reference. The image shown may differ from the actual product.
Combi kit is a kit which consists of "Rear Spring" and "Front Spring" in one set. This is the kit to get the most important setting of the suspension, "body posture" and "front-rear balance".
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring. No need to shorten the side stand because it is designed not to sink under the vehicle weight (1G) but to be lowered firmly under the riding condition (1G').
Suspension springs with Constant Rising Rate"" designed by Hyperpro. " The spring rate constantly changes to follow the movement of the suspension. It is not too soft and not too hard, and has the power to hold on even under heavy cornering and emergency braking.
●The change of the caster at the time of braking before the corner is optimized, and it makes it easy to move to the next operation.It absorbs small gaps during cornering and eliminates vibrations that interfere with the rider. ●Unlike normal springs, these springs do not have a constant spring rate and therefore do not resonate. ●After the springs are wound by computer-controlled machine tools, they are treated with shot to remove minute scratches on the surface that may lead to deterioration of performance.In addition, after the completion, the performance of each unit is inspected by a tester. ●In the Netherlands, where Hyperpro is based, all emergency bikes are equipped with Hyperpro springs.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!