105.82~ ILS
(4,369 JPY)
5 (19 Reviews)
Excellent
I still prefer zeta's Handlebar and Fit.I am finally happy with the Position of my wr250X. We are using euYamahaOEMHigh seat and yz125Racerfootpeg with MOTARDMedium of zeta comp bar, but the Handlebar is too far and too low as it is with OEM Clamp. 10?Up is not high enough and the Front load is reduced. Up is too high and the Handlebar is too close and the front load is too low and unstable. 14? Up is the most flexible and I like it because I can add it intentionally by BodyAction.
Reviews For ZETA Bar Rise Spacer From Other Webike User
Very Good
It won't increase performance, but it will increase Handlebar.I installed this to increase the Handlebar by 15mm.
I already had a 30mm up bar rise kit installed, so this is an addition.
I bought the M8×75mm bolt at a jungle store because the length of the bolt doesn't match the length of the supplied bolt. So I bought a M8×75mm bolt from jungle and installed it.
In this case, the included Bolt2Quantity:I'm not sure if this is a good idea or not, but I think it's a good idea.
I wanted it as a Single Item.
The feeling of putting it on is not so different from the original 30mm up, and the color is not so different from the original (laughs).
The rigidity has not diminished even after raising it this high.
However, if you do this, it is hard to find a Bolt that is too long to buy separately.
It would be a waste of time if you don't check the length of the cable, brake hose, and wire before taking the plunge.
It's only 15mm, but it's a lot less tiring to ride.
However, if your posture is upright, your buttocks will easily hurt, so you will not want to ride unless you do so in moderation.View Detail
Excellent
Just the right height for fine tuning.Useful for fine-tuning the position of MOTARD and MotocrossMotorcycle. 14mm, 19mm, 30mm and many lineups are available.
We basically use Normal seat for commercial MOTARD and TRAIL. (JapanSpec.) High seat is the basic. (euSpec.usSpec.)
The zetaBar rise kit and various handlebars of zeta are indispensable items for fine adjustment of position.View Detail
Excellent
Easy to maintainThe Cable and Brake hoses were Large sturdy with NORMAL.
It's only a few centimeters up, but it makes standing very easy to ride.View Detail
Excellent
This is the best way to introduce high seatI put it on the 2009 WR250X that I newly purchased in order to run the MOTARDCourse with my wife, and since I had already installed it in my 2007 WR250XeuHigh seat introduction vehicle, I had already confirmed the preeminent accuracy and appropriateness of the position, so I bought this one without hesitation. It is another purchase. Webig is convenient because there are many products in stock.View Detail
Excellent
Straight ahead, no problem.COMP Handlebar Motard-Medium with this Spacer.
There was not enough room in the hose between ABS and brake master, and it was a little protruding at LeftFull Stare.View Detail
Most Viewed Reviews Of ZETA Handlebar Riser
Very Good
It won't increase performance, but it will increase Handlebar.I installed this to increase the Handlebar by 15mm.
I already had a 30mm up bar rise kit installed, so this is an addition.
I bought the M8×75mm bolt at a jungle store because the length of the bolt doesn't match the length of the supplied bolt. So I bought a M8×75mm bolt from jungle and installed it.
In this case, the included Bolt2Quantity:I'm not sure if this is a good idea or not, but I think it's a good idea.
I wanted it as a Single Item.
The feeling of putting it on is not so different from the original 30mm up, and the color is not so different from the original (laughs).
The rigidity has not diminished even after raising it this high.
However, if you do this, it is hard to find a Bolt that is too long to buy separately.
It would be a waste of time if you don't check the length of the cable, brake hose, and wire before taking the plunge.
It's only 15mm, but it's a lot less tiring to ride.
However, if your posture is upright, your buttocks will easily hurt, so you will not want to ride unless you do so in moderation.View Detail
Excellent
Just the right height for fine tuning.Useful for fine-tuning the position of MOTARD and MotocrossMotorcycle. 14mm, 19mm, 30mm and many lineups are available.
We basically use Normal seat for commercial MOTARD and TRAIL. (JapanSpec.) High seat is the basic. (euSpec.usSpec.)
The zetaBar rise kit and various handlebars of zeta are indispensable items for fine adjustment of position.View Detail
Excellent
Easy to maintainThe Cable and Brake hoses were Large sturdy with NORMAL.
It's only a few centimeters up, but it makes standing very easy to ride.View Detail
Excellent
This is the best way to introduce high seatI put it on the 2009 WR250X that I newly purchased in order to run the MOTARDCourse with my wife, and since I had already installed it in my 2007 WR250XeuHigh seat introduction vehicle, I had already confirmed the preeminent accuracy and appropriateness of the position, so I bought this one without hesitation. It is another purchase. Webig is convenient because there are many products in stock.View Detail
Excellent
Straight ahead, no problem.COMP Handlebar Motard-Medium with this Spacer.
There was not enough room in the hose between ABS and brake master, and it was a little protruding at LeftFull Stare.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING