36.88 ILS
(1,518 JPY)
4 (6 Reviews)
Average
Fender Eliminator of OffIt's a standard product for Off-road motorcycles to be Fender Eliminator.
I have been using it a lot for a long time, but I recommend you to buy both the License Plate Bracket and the License Plate Holder at the same time.
If you don't have a Holder, the License Plate will be bent at once.
Quantity:I think it's safe to say that it's something you buy in a set.
I'm not worried about cracks etc. as this Bracket is vibration proofed.
Reviews For ROUGH & ROAD RALLY 390S Number Bracket From Other Webike User
Very Good
Number Easier for desorption.【What made you decide the purchase?】
My car was an OEM Fender, because there was a possibility that Number and Blinker might drop out due to forest roads and intense vibration, I bought it to fix the number with this product by removing OEM Fender.
【How was it actually used?】
In my car, the mounting part is Plastic, so I had to open holes arbitrarily with Drill.
For the convenience of drilling a hole in OEMNumberCover, since I attached NumberCover directly to the vehicle now, I did not use it after all.
As a matter of fact, I planned to attach this product to the vehicle and License Plate Light to hold it with Bolt, but since License Plate Light is no longer usable, I no longer use this part.
【Was it difficult to install? (Hard parts case)】
Optionally drill a hole in the vehicle with Drill and you can easily Bolt-on.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Number Please go through holes and open holes in the car.
[Is there anything I was disappointed about?]
It's heavy except for. Although the parts themselves are solidly constructed, the installation becomes the end of the vehicle, so the vibration increases. Depending on the strength of the vehicle attachment part, Crack enters the vehicle, there is a possibility of dropping out by Number. Also, since ScrewFemale that comes with parts can be easily rotated without any tool by anyone, theft. Please be careful.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
For people whose usage is clearly decided, I think that it is a good changeable part of Large.
【Have you compared items?】
There will. It is OEM's NumberCover.View Detail
Excellent
Off car etc License Plate Bracket【What made you decide the purchase?】
I bought it because I wanted to attach Number directly to the car body Rear Fender.
【How was it actually used?】
It was easy to detach Number without tool when we wanted to remove Number.
【Was the installation difficult? (Hard parts case)
In some cases, we had to open a hole in the car body, so I used to care for the alignment.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I'd like to get the center of the car firmly, but quite human eyes are accurate. If you like me Large If you like body, you can work earlier if you work with parallelism and height determined visually.
[Is there anything I was disappointed about?]
There is none. I think that it is a good part.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
[Others]
It was easy to pierce Plastic by opening a hole with Solder iron.
Even if it fails, you can plug it with melted Plastic.View Detail
Very Good
Because it is universal, it depends on ingenuityEnough feeling of rigidity. It's Universal so you can install it on any Fender depending on your ingenuity. rigidity - I will exchange it for the price, I wish I had made it a bit lighter - - -. I think that it will be possible to produce satisfactory things if made with Aluminum, but it seems to be close to 10,000 yen.View Detail
Excellent
MaybeMaybe - - It may have been installed upside down!
But you can arrive and do not mind!
I read notes on posting Impre.
"After posting the Impression that was posted, posting may be suspended if the content is judged inappropriate. "
Mackenzie w
Recent my impressions may apply to inappropriate contents w www
Recent Off cars are On, but Number and Tail lights - Blinkeretc. It is made to be able to remove everything by removing several Bolt, and I am deeply moved by the kindness of Manufacturer.
If it also goes back a little over 15 years, in this way you have to move the Number over the Fender. No, I do not dislike having to move it, or to drill a hole with Drill in Fender. Rather, I think that the License Plate of the Off car is on the Fender, and the part where it falls down in a forest road etc. and it is crushed into disgust is a constituent element.
Collapsed License Plate is a precious Attachment of Off car.
If you can understand it, this Laflo's License Plate Bracket is a Parts that must be purchased by anyone who rides a little older car.
Large body - - I like the products of Raflo and I recommend it because I use it quite a lot, but Off products are good for RafloView Detail
Excellent
Built-in Number InstallationI think this is a good product. I purchased instead of Bracket when I installed Number.
Although it is slightly heavy, I think it is strong against stickiness and vibration because it is completely made of iron.
When you use Aluminum's guy with weight saving, it will almost break due to vibration in rough road driving, so iron is the bestView Detail
Most Viewed Reviews Of ROUGH & ROAD Reverse-Bracket
Very Good
Number Easier for desorption.【What made you decide the purchase?】
My car was an OEM Fender, because there was a possibility that Number and Blinker might drop out due to forest roads and intense vibration, I bought it to fix the number with this product by removing OEM Fender.
【How was it actually used?】
In my car, the mounting part is Plastic, so I had to open holes arbitrarily with Drill.
For the convenience of drilling a hole in OEMNumberCover, since I attached NumberCover directly to the vehicle now, I did not use it after all.
As a matter of fact, I planned to attach this product to the vehicle and License Plate Light to hold it with Bolt, but since License Plate Light is no longer usable, I no longer use this part.
【Was it difficult to install? (Hard parts case)】
Optionally drill a hole in the vehicle with Drill and you can easily Bolt-on.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Number Please go through holes and open holes in the car.
[Is there anything I was disappointed about?]
It's heavy except for. Although the parts themselves are solidly constructed, the installation becomes the end of the vehicle, so the vibration increases. Depending on the strength of the vehicle attachment part, Crack enters the vehicle, there is a possibility of dropping out by Number. Also, since ScrewFemale that comes with parts can be easily rotated without any tool by anyone, theft. Please be careful.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
For people whose usage is clearly decided, I think that it is a good changeable part of Large.
【Have you compared items?】
There will. It is OEM's NumberCover.View Detail
Excellent
Off car etc License Plate Bracket【What made you decide the purchase?】
I bought it because I wanted to attach Number directly to the car body Rear Fender.
【How was it actually used?】
It was easy to detach Number without tool when we wanted to remove Number.
【Was the installation difficult? (Hard parts case)
In some cases, we had to open a hole in the car body, so I used to care for the alignment.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I'd like to get the center of the car firmly, but quite human eyes are accurate. If you like me Large If you like body, you can work earlier if you work with parallelism and height determined visually.
[Is there anything I was disappointed about?]
There is none. I think that it is a good part.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
[Others]
It was easy to pierce Plastic by opening a hole with Solder iron.
Even if it fails, you can plug it with melted Plastic.View Detail
Very Good
Because it is universal, it depends on ingenuityEnough feeling of rigidity. It's Universal so you can install it on any Fender depending on your ingenuity. rigidity - I will exchange it for the price, I wish I had made it a bit lighter - - -. I think that it will be possible to produce satisfactory things if made with Aluminum, but it seems to be close to 10,000 yen.View Detail
Excellent
MaybeMaybe - - It may have been installed upside down!
But you can arrive and do not mind!
I read notes on posting Impre.
"After posting the Impression that was posted, posting may be suspended if the content is judged inappropriate. "
Mackenzie w
Recent my impressions may apply to inappropriate contents w www
Recent Off cars are On, but Number and Tail lights - Blinkeretc. It is made to be able to remove everything by removing several Bolt, and I am deeply moved by the kindness of Manufacturer.
If it also goes back a little over 15 years, in this way you have to move the Number over the Fender. No, I do not dislike having to move it, or to drill a hole with Drill in Fender. Rather, I think that the License Plate of the Off car is on the Fender, and the part where it falls down in a forest road etc. and it is crushed into disgust is a constituent element.
Collapsed License Plate is a precious Attachment of Off car.
If you can understand it, this Laflo's License Plate Bracket is a Parts that must be purchased by anyone who rides a little older car.
Large body - - I like the products of Raflo and I recommend it because I use it quite a lot, but Off products are good for RafloView Detail
Excellent
Built-in Number InstallationI think this is a good product. I purchased instead of Bracket when I installed Number.
Although it is slightly heavy, I think it is strong against stickiness and vibration because it is completely made of iron.
When you use Aluminum's guy with weight saving, it will almost break due to vibration in rough road driving, so iron is the bestView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING