145.33 ILS
(5,982 JPY)
5 (2 Reviews)
Excellent
The 2020 fad is inevitable! Bright LED Bar Light
Are you struggling with the darkness of your commuter Scooter's Headlight? The Kashimura LED Bar Light is a 12-bar light with The LEDTip illuminates the road at night There is another 24-round Long Type, but it's too wide for most I don't think you can put it on a Motorcycle
The brightness is so intense that the Switch is set up in the middle of the Wiring and turned off when it's normal and drive It will probably be too bright and annoying for oncoming traffic to see
The brightness is perfect Once you experience this LED light bar, you will never be satisfied with an ordinary headlight It's a body that doesn't have one Anyway, the amount of light is strong, and thanks to the Lens, it's also quite diffuse, so the pedestrians on the sidewalk are able to see from your feet It illuminates the whole area up to
It's a must-have item for summer 2020, which is a two birds with one stone, as it looks and feels racy
Reviews For Kashimura LED Working Lamp Short From Other Webike User
Very Good
Out is used in place of Light.I had to run through a mountain road without a single streetlight in the middle of the night in the middle of winter (a section of about 100km is frozen and covered with snow) alone, so I bought it to reinforce the too dark headlight of the TDM900.
TDM900 is available in High beam and Low beam Quantity:Pair (for Left and Right) They're switchable, and both are H7 Multi-reflectors (55Watt each), but despite the specifics, they're dark anyway!
Even Scooters are brighter nowadays, aren't they? It's so dark that it makes me cry.
This product is a full LLED and 36Watt.
The 55Watt of OEM Halogen is of course higher than the OEM Halogen's 55Watt, and also the wattage is higher in the large range than the 20Watt class of LED bulbs that are usually brighter than OEM Halogen, so the darkness of the lacquer black will be blown away! The idea is that it may illuminate the
To fit, pull the included bracket out of the body and use the BoltQuantity:It's a 2pc fixture, but it's quite heavy and needs to be fixed in a sturdy (rigid) place.
If you drill a hole in a Cowl or something like that and bolt it down, you can be sure that the Cowl will crack and fall.
Front fork's outer tube or Engine GuardBumper should be as sturdy as the Engine GuardBumper.
All bolts included are Material:Stainless Steel.
Of course it works, but...
It must be made in China, it was very inaccurate, and the Nut could not be turned to Smooth by hand.
It's nothing if you don't mind because you can use it, but I don't like that kind of thing Large, so I used Tap and Dice to prepare the Screw pile before I used it.
When I finished putting it on and the lights came on...
Ooh! That's 36Watt, super dazzling!
The glare, however, is oncoming traffic!
Since there is no lens cut, all the 36Watt light is diffused and emitted in a wide area in front of the lens.
1Quantity:2pc. It's a murderous act, just like blindfolding the eyes if you are illuminated from the other side of the road.
If you illuminate the vehicle in front of you in the same lane, it would be like a high beam that illuminates a wide area with super high performance, and it would definitely cause a Large weird annoyance.
So it cannot be used in place of Headlight.
Cannot be used as a High beam, Low beam, or Fog Lamp!
However, it is a superb work light.
The 36Watt LED without the Renne Squat illuminates a wide range of areas as brightly as if it were like this when it is serious.
Even if you don't have LensSquat, you still have Reflector, so the light flux will converge forward to some extent.
So, my strategy to light up the front with this instead of High beam failed.
I was hoping for a light source like the RALLY50Light, but the light is diffused and the amount of light is not enough to illuminate the road surface.
The TDM900 OEMHeadlight is still better than the TDM900 OEMHeadlight that bemoans the gloom and darkness.
On the other hand, unlike the High beam, the periphery is super visible.
Information signs in front of, almost beside or high above the Tire are very brightly illuminated and very easy to see.
However, that means that the light is diffused and is a Large nuisance to other cars.
So it should not be used as a substitute for Headlight in mixed traffic.
No, no, no.
I Quantity before and after:Pair (for Left and Right) I used it in a special environment where no one was in the car, so I was able to run with the OEM's darker light to dimly illuminate the front of the car while the light illuminated my surroundings clearly.
As a headlight, it's incompetent, but as a work light, the only thing that's really great about it is the brightness.View Detail
Most Viewed Reviews Of Kashimura Lights / Lanterns / Lighting / Work Lamps
Very Good
Too big!There is a narrower MODEL for the same product, but if you are using it for a motorcycle, that is by far the Recommendation.
Click here to see the small side of the imprint.
https://imp.webike.net/article/446647/
It is basically an LED light bar that is twice as long as Small Size.
That's as far as it goes, but it's just too big!
Large does not equal Small!
No motorcycle has ever been able to install this on a motorcycle without feeling comfortable!
It would be very useful as a work light to attach to the back of a car (truck) or as a floodlight to be used outdoors from the car's power source.
In addition, as I wrote in the Small daisy's imprints, it is absolutely no good to use it in place of Headlight.
Cannot be used as a High beam, Low beam, or Fog Lamp!View Detail
Very Good
Out is used in place of Light.I had to run through a mountain road without a single streetlight in the middle of the night in the middle of winter (a section of about 100km is frozen and covered with snow) alone, so I bought it to reinforce the too dark headlight of the TDM900.
TDM900 is available in High beam and Low beam Quantity:Pair (for Left and Right) They're switchable, and both are H7 Multi-reflectors (55Watt each), but despite the specifics, they're dark anyway!
Even Scooters are brighter nowadays, aren't they? It's so dark that it makes me cry.
This product is a full LLED and 36Watt.
The 55Watt of OEM Halogen is of course higher than the OEM Halogen's 55Watt, and also the wattage is higher in the large range than the 20Watt class of LED bulbs that are usually brighter than OEM Halogen, so the darkness of the lacquer black will be blown away! The idea is that it may illuminate the
To fit, pull the included bracket out of the body and use the BoltQuantity:It's a 2pc fixture, but it's quite heavy and needs to be fixed in a sturdy (rigid) place.
If you drill a hole in a Cowl or something like that and bolt it down, you can be sure that the Cowl will crack and fall.
Front fork's outer tube or Engine GuardBumper should be as sturdy as the Engine GuardBumper.
All bolts included are Material:Stainless Steel.
Of course it works, but...
It must be made in China, it was very inaccurate, and the Nut could not be turned to Smooth by hand.
It's nothing if you don't mind because you can use it, but I don't like that kind of thing Large, so I used Tap and Dice to prepare the Screw pile before I used it.
When I finished putting it on and the lights came on...
Ooh! That's 36Watt, super dazzling!
The glare, however, is oncoming traffic!
Since there is no lens cut, all the 36Watt light is diffused and emitted in a wide area in front of the lens.
1Quantity:2pc. It's a murderous act, just like blindfolding the eyes if you are illuminated from the other side of the road.
If you illuminate the vehicle in front of you in the same lane, it would be like a high beam that illuminates a wide area with super high performance, and it would definitely cause a Large weird annoyance.
So it cannot be used in place of Headlight.
Cannot be used as a High beam, Low beam, or Fog Lamp!
However, it is a superb work light.
The 36Watt LED without the Renne Squat illuminates a wide range of areas as brightly as if it were like this when it is serious.
Even if you don't have LensSquat, you still have Reflector, so the light flux will converge forward to some extent.
So, my strategy to light up the front with this instead of High beam failed.
I was hoping for a light source like the RALLY50Light, but the light is diffused and the amount of light is not enough to illuminate the road surface.
The TDM900 OEMHeadlight is still better than the TDM900 OEMHeadlight that bemoans the gloom and darkness.
On the other hand, unlike the High beam, the periphery is super visible.
Information signs in front of, almost beside or high above the Tire are very brightly illuminated and very easy to see.
However, that means that the light is diffused and is a Large nuisance to other cars.
So it should not be used as a substitute for Headlight in mixed traffic.
No, no, no.
I Quantity before and after:Pair (for Left and Right) I used it in a special environment where no one was in the car, so I was able to run with the OEM's darker light to dimly illuminate the front of the car while the light illuminated my surroundings clearly.
As a headlight, it's incompetent, but as a work light, the only thing that's really great about it is the brightness.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING