I have mounted on a rebel 500 from 2024 and it fits nust fine.Compared to the stock one it is a great improvement, see attachment.Throttle, clutch and break line fits just at their limits and from my perspective extensions shall be considered.
View Detail- Instock
177.28 ILS (7,829 JPY) 194.73 ILS Save 9%
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
[Size*] W: 710 H:100 R:200 L:130
[Handlebar diameter] 1 inch (25.4mm)
*W (Overall width), H (Height), R (Amount of pull-back), L (Clamp section straight), Unit (mm)
**Not compatible with 2025 model (MC49) and Rebel 1100.
*This product is approximately 65mm back and 3mm lower in height than the stock handle.
*Overall width is -5mm at the end of the stock lever.(Overall width: ±20mm / height: ±40mm)
*This product does not require modification of hoses, harnesses, or wires. However, if you are concerned, consider replacing the brake hoses and other components with ones of appropriate length.Adjust the tension of the axle wire due to the changes in handling.
*The thickness of the paint on this product may vary.There may be a dullness when turning to the axle side.In this case, it is necessary to adjust the throttle sleeve side of the handlebar by shaving with a file.
*The punch marks on this product are for reference only.Please adjust the position of the handlebar to your liking.
*The holes in the switch box of this product may be slightly out of alignment.In this case, it is necessary to widen the hole.If you are a person who is finicky about bolt-on installation, or if you are nervous about the labor cost and process, it is recommended that you consult with your HONDA Dream shop beforehand.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
We have newly added a matte black (non-glossy) handlebar for the Rebel 250/Rebel 500 to our handlebar series that moves the bar approximately 65mm back toward the rider, compared to the stock handlebars, for improved comfort.The matte black color (non-glossy) complements the gear and pulse of the Rebel, harmonizing perfectly with the bike's design.
Stock wires and harnesses can be used as it is.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.